Building instructions pendant lamps w. 3D printed clip
All 50LtTA pendant lamps are assembled with paper binders – no glue needed. You should be able to find these in your local office supply. To mount the lampe you'll need 3 pieces of 2mm brass wire. They should be 30cm long. You can find them in hobby shops – locally or online. To bend the wires and affix them to the electrical wire you'll need to 3D print the Wire Clip and the Bending Tool When using corrugated cardboard to make the 50LtTA lamps you'll find that some creasing is more challenging…continue reading →
