Building instructions for Work Lamp and Reading Lamp

Building instructions for Work Lamp and Reading Lamp

Materials: 3m wire, socket, lamp socket (w. switch) and a lightbulb – LED spot. If you are unable to get a socket with a switch then a switch on the wire works fine. 10X10mm strips of wood 7oo mm (1200mm for the Reading Lamp) and 500mm 2 M4 45mm, 1 M4 35mm, 1 M4 16mm bolts 3 10mm steel springs – you can buy these in well stocked hardware shops usually in lengths of 300mm. Cut off the length needed. 10 steel washers, 7 nylon washers 4 locknuts casting concrete   Download the STL files and…continue reading →

50LtTA #2 Reading Lamp

NOTE: The base and the wire clips have been updated to version 2.0. #2 is a floor lamp for reading in a chair or a sofa. The lamp is identical to #1 aside from being 40cm taller. Download the STLs below, http://www.50lampstotakeaway.org/2017/11/25/50ltta-1-work-lamp/continue reading →