50LtTA #1 Work Lamp

NOTE: December 2018 wire clips have been updated to version 2.0. The old version had a tendency to snap when mounted – this issue is now solved. Merry Christmas.

NOTE: The base has been updated to version 2.0 – it has a better grip on the concrete base when cast.

#1 is a straightforward work lamp. It twists and points an LED spot directly on your work space. #1 is a tall lamp – 70cm – this means that is is out of your way – but still able to shed light on your work. Please leave a comment below if you have any questions.

Aside from the STL files for 3D printing, wire, E27 bulb and socket you’ll need some casting concrete, 1200mm of 10X10mm wood list, a selection of M4 machine bolts and locknuts and a steel spring.

10X10mm strips of wood 7oo mm and 500mm

2 M4 45mm, 1 M4 35mm, 1 M4 16mm

10 steel washers, 7 nylon washers

4 locknuts

You can find the building instructions here

Enjoy.