Building instructions pendant lamps w. 3D printed clip

Building instructions pendant lamps w. 3D printed clip

All 50LtTA pendant lamps are assembled with paper binders – no glue needed. You should be able to find these in your local office supply. To mount the  lampe you'll need 3 pieces of 2mm brass wire. They should be 30cm long. You can find them in hobby shops – locally or online. To bend the wires and affix them to the electrical wire you'll need to 3D print the Wire Clip and the Bending Tool  When using corrugated cardboard to make the 50LtTA lamps you'll find that some creasing is more challenging…continue reading →
50LtTA_#47

50LtTA_#47

50LtTA #47 is a small directional pendant lamp suitable for a side table or for decorative purposes. Height 53cm You'll need the Wire Clip & Bending Tool for this lamp.    continue reading →